FAG N2330-E-M1 Cylindrical roller bearings with cage

A1:30 mm; s1:24.6 mm; C0:18.2 kN; A:54 mm; Z:69.3 mm; Designation of open end cover:SCOU208-24; E:22 mm; H2:98 mm; Designation of housing:PG208N-; G:M6x1;

Bearing - Housing - Seal:LSE611BRHRSS; Seal Type:Viton Single Lip; Housing Width:6.8 in; Dimension H2:18.5 in; Dimension K:5.0 in; Maximum Speed:1220 rpm; Bolt Size:4 x M24; Dimension L:21.0 in; Dimension H1:1.4 in; Cor - Static Load Rating:186142 lbf;

Type:Bearings with Housin; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Retained:No; Bearing Material:[Steel] Steel; Height H(mm):30 ～ 50; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Mount Type:Key Groove Type;

F:22 mm; Characteristic cage frequency, FTF:0.46 Hz; Dw:2 mm; B:21.5 mm; Cr:14 kN; B2:36.5 mm; Max operating temperature, Tmax:120 °C; Track load capacity cylindrical outer ring:14.5 kN; Min operating temperature, Tmin:-20 °C; Bearing with/without cage:Avec;

H:117 mm; Recommended tightening torque for set screw:11.5 Nm; L2:16 mm; N2:49 mm; P:300 mm; Dz:100 mm; A5:19.2 mm; A1:16 mm; d1:67.2 mm; N1:19 mm;

Housing Material:[Aluminum Alloy] 201; Holder Surface Treatment:Clear Anodize; Bearing Material:Stainless Steel; Shape:Flanged Pilot Type; Number of Bearings:Double; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Type:Bea

Flange O.D. H(φ):39; Bearing Retained:No; Flange Shape:Square Type; Holder Surface Treatment:Not Provided; Width T(mm):35; Shape:Flange Type; Days to Ship:8 Days; Bearing Part Number:606; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double;

RoHS:6; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Clear An

Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Bearing Part Number:6204; Width T(mm):50; Bearing I.D. d(mm):20;

Locating Rings (width x OD):SR80X8; End Cover2:EC508-607; Adapter Sleeve1:H308; Lockwasher:MB8; Cage Type:EJ; Max Oil Speed:7500; Locknut:KM8; Shaft Diameter d:35 mm; H:108.00 mm; Housing Mass:2.9 Kg;

Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Number of Bearings:Single; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Flange O.D. H(φ):96;

K - Factor7:1.51; Ab - Cage-Cone Frontface Clearance:4.1 mm; Cg - Geometry Factor:0.116; Design Units:Imperial; db - Cone Backface Backing Diameter:169.93 mm; G1 - Heat Generation Factor (Roller-Raceway):606.1; Aa - Cage-Cone Backface Clearance:6.9 mm; C1 - Dynamic Radial Rating (1 million revolutio

Shape:Flanged Pilot Type; Holder Surface Treatment:Black Oxide Coating; Days to Ship:7 Days; Bearing Retained:No; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):54; Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel;

Outer Ring Type:Flat; Series:Type B (Standard Typ; Revolution Frequency(rpm):920; Raceway Ring Shape:Self-aligning roller; Days to Ship:9 Days; Specifications/Environment:Standard; Internal Clearance Symbol:C3; Basic Load Rating, Dynamic Rating(N):1130000; B:92; Rolling Element Material:Steel;

Designation of housing:PG207N-; C:25.7 kN; S:17.5 mm; H1:20 mm; E:22 mm; J:68 mm; H:47.6 mm; T min.:-20 °C; Weight:1.56 kg; A1:27 mm;