FAG LOE636-N-AF-L Plummer block housings

H1:82.55 mm; Stabilizing ring:2 x SR-15-0; P90°:45.4 kN; N1:19.05 mm; Max. speed for Taconite seal:1250 r/min; Cap bolt recommended tightening torque:81.3 N·m; Housing:SAF 515; Cap bolt:2 x 1/2-13 UNC; Appropriate attachment bolt size G:0.625 in; J min.:219.075 mm;

B:31 mm; Reference speed:5000 r/min; da max.:83.7 mm; Da min.:107 mm; ra max.:1.5 mm; d2 ≈:83.7 mm; Ca min.:0.4 mm; Da max.:116 mm; Ba min.:9 mm; Fatigue load limit Pu:22.8 kN;

B:33.00 mm; Basic Static Radial Load Rating Co:62000 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:99500 N; Oil Speed Rating Open/Shielded n2:6000 rpm; d:55.000 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n

b1:19 mm; d2:120 mm; r1s (min):2.1 mm; rs (min):2.1 mm; F:144 mm; D:215 mm; Dynamic (Ca):261 kN; s:2.5 mm; d2 (max):154.5 mm; b:11 mm;

B:5.00 mm; d:10.000 mm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Dynamic Radial Load Rating C:1820 N; Basic Static Radial Load Rating Co:930 N; Fillet Radius ra:0.30 mm; D:19.0000 mm; Sealed Speed Rating n3:20000 rpm; Oil Speed Rating Open/Shielded n2:43000 rpm;

Labyrinth ring:2 x LOR 112; Adapter sleeve assembly:SNW 3024x4.1/8; da:104.775 mm; Ca:55.804 mm; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; P150°:58.7 kN; H1:114.3 mm; Da:180 mm;

r2 max.:1 mm; Dw:4 mm; r1,2 min.:0.3 mm; r1 max.:0.8 mm; Mass needle roller:1.36 g; Lw:13.8 mm;

Bolt Pattern E:14 1/2 in; Frame Size A:5 1/4 in; Shaft C/L Distance F:1 31/32 in; Frame Accepts These Shaft Sizes (Bearing Bore):40 mm; Bolt Pattern C:0.55 in; Length H:0.625 in; Bolt Pattern D:2 3/4 in; Travel:9; Height G:3.938 in; Frame Size B:16 in;

Maximum dynamic radial loads Fr max.:830 kN; B:172.64 mm; E:218.46 mm; K:8 mm; Fatigue load limit Pu:200 kN; Maximum static radial loads F0r max.:1180 kN; r min.:2.7 mm; F:159.375 mm; H max.:84.965 mm; D:300 mm;

Grease Speed Rating n1:4200 rpm; Basic Dynamic Radial Load Rating C:74100 N; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:93000 N; d:85.000 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:1.00 mm; D:120.0000 mm; B:36.00 mm;

Dimension series:7GB; d:90 mm; Basic dynamic load rating C:283 kN; Da max.:177.5 mm; Db min.:179 mm; Calculation factor Y:0.72; Limiting speed:3400 r/min; C:30 mm; Fatigue load limit Pu:35.5 kN; Reference speed:2400 r/min;

P120°:151 kN; A1:190.5 mm; P180°:160 kN; RG:1 NPT; Da:339.999 mm; P60°:416 kN; S:4.763 mm; R1:120.65 mm; Bearing:22238 CCK/W33; Cap bolt, SAE grade:8;

d1 ≈:52.2 mm; Da max.:56 mm; d:38 mm; Basic dynamic load rating C:45.7 kN; Calculation factor Y0:0.8; Basic static load rating C0:52 kN; Cb min.:3.5 mm; da max.:44 mm; r3,4 min.:1.3 mm; Db min.:60 mm;

Bearing:22215 EK; Pa:6.94 kN; H2:30.163 mm; Mass pillow block:14.3 kg; Adapter sleeve assembly:SNW 15x2.1/2; h:28.575 mm; A2:120.65 mm; Ca:37.008 mm; ba:32.544 mm; R2:21.431 mm;

Sealed Speed Rating n3:5600 rpm; Grease Speed Rating n1:5600 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:49500 N; B:30.20 mm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:49000 N; Oil Speed Rating n2:7500 rpm; D:80.0000 mm; d:40.000 mm;