FAG 71888-MP Angular contact ball bearings

Ca:123.8 mm; N1:34.925 mm; PG:1/4 NPT; P180°:113 kN; Stabilizing ring:SR-38-32; L:711.2 mm; Cap bolt:4 x 7/8-9 UNC; ba:87.313 mm; Appropriate attachment bolt size G:1.25 in; Cap bolt recommended tightening torque:271.2 N·m;

A1:98.425 mm; P120°:59.6 kN; H:196.85 mm; Da:160 mm; H2:41.275 mm; A2:149.225 mm; P180°:64.9 kN; Cap bolt recommended tightening torque:149.1 N·m; PG:1/8 NPT; P90°:94.3 kN;

Reference grease quantity Gref:1.62 cm³; Calculation factor f2C:1.12; Number of balls z:23; Static axial stiffness, preload class D:249 N/µm; Mass bearing:0.12 kg; db min.:48.2 mm; Basic dynamic load rating C:12.4 kN; Calculation factor f:1.11; Calculation factor f2D:1.17; a:19.3 mm;

Reference speed:380 r/min; ra max.:2 mm; d:420 mm; D1:423 mm; Mass bearing:18 kg; Minimum axial load factor A:1.9; r1,2 min.:2 mm; Da max.:440 mm; Basic dynamic load rating C:765 kN; H:48 mm;

Calculation factor X:0.63; D1 ≈:472.8 mm; Db max.:531 mm; ra max.:4 mm; Calculation factor Y0:0.66; B:82 mm; Reference speed:1300 r/min; Calculation factor Y2:1.24; r3,4 min.:2 mm; Calculation factor A:6.75;

Speed Rating-Open and Shielded-Grease OSG:8500 rpm; Basic Radial Load Rating-Dynamic DC:36400 N; Speed Rating-Open and Shielded-Oil OSO:10000 rpm; D:80.0000 mm; Width - Inner Ring B1:34.93 mm; Accessories:300SWI Non-Filling N; Fillet Radius ra:1.50 mm; Basic Radial Load Rating-Static SCO:20800 N; d:

S:4.763 mm; End plug (suffix Y):EPR 22; P180°:185 kN; Pa:120 kN; PosiTrac Plus contact element (dc shaft position):B10724-161; dc:193.675 mm; Housing:SAF 340; J1:139.7 mm; P150°:151 kN; h:87.313 mm;

Fillet Radius ra:1.00 mm; D:215.0000 mm; d:170.000 mm; Oil Speed Rating Open/Shielded n2:3200 rpm; B:22.00 mm; Basic Dynamic Radial Load Rating C:61800 N; Sealed Speed Rating n3:0 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:73500 N; Grease Speed Rating Open/Shielded n1:2600 rpm;

J max.:295.275 mm; ba:40.481 mm; Appropriate attachment bolt size G:0.625 in; R1:60.325 mm; Stabilizing ring:SR-18-15; Ca:49.809 mm; Mass pillow block:22.4 kg; Bearing:22218 EK; J min.:263.525 mm; N1:19.05 mm;

H2:69.85 mm; Da:309.999 mm; J min.:492.125 mm; L:628.65 mm; P120°:85.9 kN; R1:115.888 mm; P90°:140 kN; Eye bolt:2 x 3/8-16 UNC; Pa:48.9 kN; Adapter sleeve assembly:SNW 3040x7.3/16;

D:165.1 mm; Fatigue load limit Pu:37.5 kN; T:36.512 mm; Db min.:158 mm; B:36.512 mm; Ca min.:6 mm; r1,2 min.:3.5 mm; d:107.95 mm; Limiting speed:3600 r/min; da max.:119 mm;

Fillet Radius ra:0.64 mm; B:12.00 mm; Fillet Radius rb:0.30 mm; D:42.0000 mm; Basic Dynamic Radial Load Rating C:10800 N; Grease Speed Rating n1:17000 rpm; d:20.000 mm; Oil Speed Rating n2:20000 rpm; Basic Static Radial Load Rating Co:6200 N;

Db max.:121.8 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; Preload class B GB:155 N; C2:4.7 mm; Calculation factor f1:1; Basic dynamic load rating C:31.2 kN; Calculation factor f2C:1.05; B:22 mm; dn:98 mm;

Oil Speed Rating Open/Shielded n2:2700 rpm; Basic Dynamic Radial Load Rating C:216000 N; Basic Static Radial Load Rating Co:250000 N; B:50.00 mm; D:240.0000 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; d:110.000 mm; Fillet Radius ra:2.50 mm; Accessories:One Shield;

Sealed Speed Rating n3:4000 rpm; B:47.60 mm; Basic Dynamic Radial Load Rating C:85200 N; Accessories:Shield & Seal; Oil Speed Rating n2:5300 rpm; Basic Static Radial Load Rating Co:64000 N; d:50.000 mm; D:110.0000 mm; Grease Speed Rating n1:4000 rpm; Fillet Radius ra:2.00 mm;